Home

How to use Photoshop adjustment layers to darken part of an image

To darken part of an image in Photoshop, first, create an Exposure Adjustment Layer and place it at the top of the Layers Panel. Next, access the Brush Tool (B) and set black to your foreground color. With the Exposure Adjustment layer mask selected, paint over your image to hide the darkening adjustments as needed An adjustment layer is a flexible way to add an adjustment to an image without directly changing the image itself. Every adjustment layer comes with a built-in layer mask. You can add black, white, or gray to an adjustment layer mask to target the adjustment to a particular part of a photo. Add an adjustment layer Multiply is one of several layer blend modes in Photoshop that darken an image, and simply by changing the blend mode of the adjustment layer to Multiply, the photo now appears darker, with more detail visible in the highlights and colors now looking richer and more saturated: The Multiply blend mode instantly darkens the image When you want to modify or adjust a specific area of a photo or image, you need to make a selection first. Once an area is selected you can use Photoshop image adjustment tools. This video covers the process of selecting an area of the photo (the sky only) as well as making that selected area darker using what's called an Adjustment layer A selection-based brightening method works by selecting a portion of your image, then applying a brightness adjustment to just that area. So you'd select the area you want to brighten, apply the brightness adjustment, and watch as it gets lighter

Adjustment layers work under a very simple principle: White areas show the adjustment in the image, while black areas show the image unadjusted. Gray areas show an in-between adjustment (lighter grays are more affected, darker grays are slightly affected). Paint carefully over the part of the image you want to revert back to its vibrant colors Mostly, I use the Level adjustment or the Curves adjustment as a adjustment layer. Best for non-destructive work. Exposure is too new to for me, and I'm used to the 2 above. The brightness/contrast adjustment was not working very good in early versions of PS (legacy!), so I use that one only for special adjustments

It's a good habit to get into doing this - regardless of what tools you are using! Example 1 - Darken. Here we are going to darken the right side of the photo for a in sun and in shade appearance. Step 1. The first step is to open the photo in Photoshop by going to File>Open and selecting the photo to edit. Step Use the Selective Color Adjustment Layer to modify specific amounts of a primary color without modifying other primary colors in your image. Check the Absolute box if you want to adjust the color in absolute values. Example: If you have a pixel that is 50% yellow and you add 10%, you are now at a 60% total

In Photoshop Adjustment Layers, the Exposure Adjustment has three sliders that adjust Exposure, Offset and Gamma. Use the Exposure slider to adjust the highlights of the image, the Offset slider for the mid-tones and the Gamma to target the dark tones only. 5 Use Photoshop Layer Mask to adjust exposure in one area of an image. Use Photoshop Layer Mask to adjust exposure in one area of an image Add a Vignette in Photoshop create a new layer above all the other layers. Fill it with white color. Reduce the Fill to 0% and add a Gradient Overlay in the layer style window

How To Darken Images And Layers In Photoshop (3 Easy Tools

To match the saturation tones in the image, locate the bottom of the Layers Panel, click on the Adjustment Layer symbol, and select Hue/Saturation or hit ALT or OPTN + U on the keyboard. The Hue/Saturation window should appear with an array of different options to apply color to the selected layer In order to hide the Levels Adjustment layer at the sides of the picture, (as shown in the photograph at the top of this article, and in the layer mask shown below) use a Foreground to Transparent, Linear Gradient, with the foreground color set to black. Click+drag from the edge of the canvas on the left to near the edge of the homestead Levels modify the tonal values in an image by adjusting the levels of the shadows, midtones, and highlights. It's one of the most used tools in the adjustment layer panel, and using just a touch of levels will go a long way in correcting your images. 3 Photoshop has many types of layers and adjustment layers available, but there are six that you'll find you need to use again and again. Learning how they should be used may seem a little daunting for beginners, but there are plenty of Photoshop tutorials to help you out, and once you've got to grips with them, you'll find they play a part in the creative process of almost every image you. RELATED ARTICLE: 5 FUN WAYS TO USE THE CURVES LAYER IN PHOTOSHOP. Selective Darkness. If you are looking just to make certain areas of you photo darker, grab the black triangle under the curve and push it right. Now click on the layer mask and hit control (or command on a MAC) I. This will invert the layer

A quick Adobe Photoshop tutorial explaining how to edit part of an image using a curves layer with a layer mask.You can find the image used in the tutorial a.. The Brightness/Contrast adjustment layer is the simplest way to adjust the exposure or contrast of an image. Drag the Brightness slider to the right to brighten things, drag it to the left to darken things. It's the same for the Contrast slider: drag it to the right to add contrast, drag it to the left to take it away

Open up the image you wish to modify. Click on the Background Layer in the Layers panel. Select Layers > New Adjustment Layer > Curves. You can give the new adjustment layer a descriptive name, or just accept the default name as shown below. Click OK. Take a close look at the panels on the right of your screen (and shown below) On the other hand, if you want to lighten parts of the image, use the same Curves adjustment and then go to Filters and Adjustments > Invert. Then use a white brush to lighten parts of the overlay. Using Photoshop Overlays. Photoshop overlays are a quick and easy way to add something extra to your photos and make them more unique Go to Layer > New Adjustment Layer > Color Balance and change the Midtones settings: Step 4. Make a Curves adjustment layer and reduce the lightness, making the texture much darker. 2. Add the Model Step 1. Open the model image. Use the Quick Selection Tool (W) to isolate the model and add her to the middle area of the dark canvas. Step

Use layer masks to adjust parts of a photo Adobe

Solved: Let's say I have to images open in Photoshop CS4 / Mac (IMG-A and IMG-B. I am making some adjustment layer in IMG-A and I want to be able to copy it to - 158177 If you want an adjustment layer to apply to a single layer or a series of layers, but not have the effect cascade down and effect all layers, all you need to do is put the adjustment layer and the layers to be effected in a 'group' (select the layers and press ctrl-G or cmd-G on the keyboard).Below is a layer panel with a contrast /brightness adjustment layer, an image, a shape layer and some.

This quick video is to show you one way in which you can selectively increase the saturation of one part of your image without affecting the the rest. So it's a layer masking technique, but you know which means I'm showing you an example where we gonna be boosting the saturation or vibrance but you know you can use this on any other type of. Either with the Select menu then 'color range'. You can also attempt to use the Select Menu then 'Select and Mask'. Inside select & mask section, there's a new feature in it called select object. It may do a good job here, I haven't tested it on print as its a relatively new feature to that select and mask section The Adjustment Layers in Photoshop are a group of a super useful, non-destructive image editing tools that add color and tonal adjustments to your image without permanently changing its pixels. With the adjustment layers, you can edit and discard your adjustments or restore your original image at any time A quick Adobe Photoshop tutorial explaining how to edit part of an image using a curves layer with a layer mask.You can find the image used in the tutorial a..

How To Instantly Darken Overexposed Images With Photosho

To use a Layer Blending mode, you need to have a document with at least two layers present. At the top of the Layers palette, you'll see an option that says Normal. Click the drop-down menu to see all the available modes. Select one of the modes to see the result in your document window Step 1: Add A Curves Adjustment Layer. Let's begin by darkening the overall image using a Curves adjustment layer. First, we'll need to add the adjustment layer, so click on the New Adjustment Layer icon at the bottom of the Layers palette: Clicking on the New Adjustment Layer icon. Then select Curves from the list of adjustment layers that. Fortunately, we can fix this problem quite easily using a Levels adjustment. To select Levels, I'll click on the New Adjustment Layer icon at the bottom of the Layers palette and select Levels from the list of adjustment layers that appears. I'm using the adjustment layer version of the Levels command rather than choosing a standard Levels adjustment from the Image menu because adjustment. Method 1of 2:Understanding Blend If Download Article. Open Photoshop with your image layer and a blank layer. Click on the Gradient Fill tool. Make sure that the selected gradient goes from Black to White. Click on the left side of the blank layer and draw a line that comes up across the image

Try this! Open the example file, then adjust the opacity of the Text layers to see the effect.. Background transparency. By default, most Photoshop documents use a Background layer. You cannot adjust the opacity of a Background layer, and it cannot be hidden. This is because you won't want the background to have transparency for most projects, especially if you're working with a photograph You can use masks with photo layers. For example, when working with a composite, or with adjustment layers, such as lightening only a portion of the image. With a Photoshop Layer Mask, you use a paintbrush to determine what parts of that layer to include in the final image Gradient fill layer over the original image. I have created a radial gradient fill layer over an image to which I'd like to add a vignette. You can do the same using the menu option Layers > New Fill Layer > Gradient. Selecting a gradient from white to black from the presets, I have chosen radial as style and 258% as the scale

Let's adjust the final brightness of the scene now, since we have it all together. Go to the top of the layers and add a new Adjustment Layer: Levels. Drag the white marker to the left to increase the amount of bright shades in the scene. Step 2. Create a New Layer. Fill it with black, and then go to its Blending Options and add Gradient Overlay Adjustment Layers. Let's look at the buttons at the bottom of the Layers Panel again. Click on the 'New fill or adjustment layer' button. You can use these adjustment layers to edit colours and contrast. The adjustments will never affect the original photo directly. It's called non-destructive editing in Photoshop 4. Copy layers between images. Once a layer has been created, it can be copied to other images by simply clicking on it in the Layers palette and dragging it across to the other open file. This is especially useful for copying adjustment layers between images. 5. Use layers to work on different parts of the image The terms burning and dodging refer to the darkroom techniques used in the printing process for controlling the exposure of selected areas of an image (nowadays, we use a similar technique in Photoshop, but enjoy far greater precision). 'Burning' refers to the process used to darken certain areas of an image when printing from negatives. This was done by allowing more light to reach a. Step 2: Select the Adjustment Layers Icon. Once the desired image is selected and sized appropriately, the recoloring process can begin. Begin this process by adding a new layer. To do this, select the fourth icon in the properties tab, which is located at the bottom right hand corner of Photoshop. Ask Question

I want to correct only part of my image

Original image before editing. 1. Contrast Adjustment. One of the simplest ways is to increase the contrast in the sky. Increasing contrast makes bright areas brighter and dark areas darker. Applying contrast adjustment to the sky will inevitably affect the foreground too, but you can apply a layer mask to mask it out Layer Masks are a powerful Photoshop tool. They can be used for compositing images or selectively applying adjustments or corrections to a specific part of an image. Masks can be used on Image Layers as well as Adjustment Layers in Photoshop.. Understanding of Layer Masks is essential. It opens up endless creative opportunities in Photoshop.These skills will also simply help you get through. Move the Brightness and Shadow sliders to darken the image, and you can also use the Curve tab to further refine the darkening effect. STEP 5 Darkening Just the Top Half The top half of this image is still too light. To fix this, click the Create New Adjustment Layer icon and choose Curves

How to Brighten a Part of Your Image in Photosho

The Adjustment Brush isolates a specific area by masking it, similar to using layer masks in Photoshop. When you click on the Adjustment Brush icon, the right panel changes to the Adjustment Brush tab. The bottom sliders modify the size of the brush and you can also determine how much feather and density (flow) you wish to apply The Curves adjustment is, hands down, one of the best tools you can use in Adobe Photoshop to edit contrast and the like. As opposed to the regular, more straightforward Brightness/Contrast adjustment, the Curves adjustment has the ability to fine-tune edits in a way that the other simply can't. In the Brightness/Contrast adjustment Properties panel, all you've got is a slider with which. To use the Smart Sharpen filter, you'll need to open a suitable image in Photoshop. Make sure you can see the Layers panel on the right. If you can't, click Window > Layers. In the Layers panel, right-click on a layer and then select the Duplicate Layers option. Press OK in the Duplicate Layer box to confirm 2. Edit Pictures Using Adjustment Layers. An adjustment layer is an editing tool that allows you to do different types of modifications to your images. You can add them in two ways. Click on the icon in the layer panel and then choose one of the adjustment layer options

The Black and White adjustment layer feature in Photoshop makes it very easy to creatively convert color photos to mono shots. In the days of black and white film cameras, photographers could use colored filters on their lenses to affect the way that light reached the film. White light is formed from the combination of different colors of light and you can see these colors broken down every. The Curves Dialog. Before you open up the Curves dialog, make sure you are working on a new layer. Then, you can open the curves tool dialog by clicking on Image in the top toolbar, then choosing Adjustments, and opting for Curves.. You can also press Control + M (or Command + M for Mac users) to pull up the dialog Create a Photo Filter adjustment layer to give the model a blue/cyan cast to fit the color of the background. Pick the color #00a7ec. Step 6. Make a Curves adjustment layer to darken the model. On the layer mask, use a soft black brush to erase the effect on her trousers as they're dark already, and reduce the effect on her body/jacket With your mask disabled (In Photoshop shift-click the layer mask thumbnail), press Ctrl+A to select all. Click on the image thumbnail, then press Ctrl+C to copy the image. Alt-click the layer mask thumbnail and press Ctrl+V to paste the image into the mask. Remember that white shows the current layer, and black hides it

Photoshop: Applying Fixes using Adjustment Layers and Masks

Adjustment Layers: Changing Only a Part of an Image and

  1. Create a new adjustment layer over the original image so your work is a flexible adjustment. Make sure to check the Layers panel to ensure you're working on the correct new layer. Using the Lasso tool, make a selection that goes along the edges of the teeth
  2. Rather than edit the original image this approach stacks the alterations on top of the image but leaves the original image unchanged. This is where Filter Layers come in. If you are already familiar with Photoshop this is the same thing as Adjustment Layers. So allow me to demonstrate a non-destructive way of editing a photograph in Krita
  3. When you apply a filter directly to a layer it will be backed into the image and cannot be undone later. (An adjustment layer, on the other hand, is non-destructive whatever it's used on. See the tutorial on Adjustment Layers. Most of Photoshop's filters will work with Smart objects
  4. Go to the LEVELS adjustment either by IMAGE > ADJUSTMENTS > LEVELS or simply command + L. Look for a white eyedropper on the lower right of the adjustment panel. Click it. Now hover over your image and click on whatever part is supposed to be white. Voila! Photoshop makes it white. This is a powerful tool so be careful
  5. Adding a Curves Adjustment Layer. One of the easiest things you can do to add warmth to photos in Photoshop is play with layers and curves. Start by opening the photo you want to edit in Photoshop and use the keyboard shortcut Ctrl+0 to size the image, so it fits into the entire screen
  6. Curves Adjustment Layer. To kick things off, I opened the original, non-edited, image into Photoshop. Right after that, I created a Curves adjustment layer. If you aren't familiar with adjustment layers when it comes to Photoshop, you can either search for Adjustment Layer on this site or you can visit this post I linked to below

Now your image should look like this: 8. At the bottom of the layers palette, click on the Create new fill or adjustment layer icon (a circle that's half black and half white). Click on Levels or Curves (whichever you prefer) and adjust accordingly to darken or lighten the area. 9. Flatten and save (with a DIFFERENT name. First, open your image in Photoshop. Step 2. Go to Layer > Duplicate Layer and name this new layer as 'Image Base'. Step 3. Press 'D' on your keyboard in order to reset the Foreground and Background colors and go to Layer > New Adjustment Layer > Gradient Map. Name this layer as 'Black and White' and click OK The Exposure Adjustment Layer in Photoshop is just one of several ways to make adjustments to the exposure of your photos. Other tools, such as Curves and Levels work in different ways and you can even use duplicated layers combined with blending modes to adjust overall exposure. Which option you choose will really be a matter of personal choice and also what seems best for a particular photo The bright areas in the image are really good but we need to lit up darken areas to find the right balance between the light and dark. To do this, create a Curves Adjustment Layer by selecting Layer > New Adjustment Layer > Curves. Now increase the brightness of the whole image using the following settings: To affect only shadows, we'll use.

How to Darken a Selection - Adobe Support Community - 851031

I introduce a layer of black or darkness, then brush away the darkness to emphasis certain parts of an image in order to (hopefully) move the viewer's eye in a certain direction across it Another way to use the patch tool in Photoshop is to replicate part of a photo. You can see my example below of giving a native New Zealand Pīwakawaka (fantail) a twin. Step 1: Open the Photograph and Create a Layer. I open my RAW photograph in Photoshop So, in part two I go through four real-world examples where you might use masking to make image corrections and adjustments, for tone control, and for creative effects including: Using layer masking for tone control. To blur and control the background. Adding a photo filter to part of your image. To create a black and white image with selective. In addition to the written tutorial below, I also have three YouTube Video tutorials for using Adjustment Layers in Photoshop: Adjustment Layers Basics. Dodging and Burning With Layer Masks. Correcting Uneven Lighting With Gradient Layer Masks . How Layers Work. Photoshop allows an image to be edited by adding Adjustment Layers onto the image

Burn Tool in Photoshop: Darken Your Image Udemy Blo

  1. g that i wanted to further darken the background without loosing detail on the nudibranch or if the slug was a bit darker, i could use a layer mask to control the areas where the adjustment should be applied and mask areas that i want to preserve the way they are
  2. To change the brightness of just one layer in Photoshop, I recommend using the Adjustments panel so that you can come back any time you want and change the settings: * Select the layer whose brightness you wish to adjust by clicking its name in th..
  3. Merge all layers in an image using a single command. Layers. Parts of Photoshop file that keeps different parts of the design separate from each other. Scale. To make larger or smaller. Font. use these to darken parts of your image where you click and drag this tool. You can set the exposure amount and choose highlights, midtones or shadows.
  4. osity mask as before press ctl+alt+~ or 2. 2- Open a new curves adjustment layer 3- Click B&W cookie icon at bottom of layers pallet to open the adjustment selections window and select curves. Doing this will automatically load th
  5. Photoshop is to use the dedicated Dodge and Burn tools, selected with the O shortcut key. If you use these tools directly on your photograph layer, however, they are destructive because they permanently change the pixels in your image. This might be best suited for making small refinements during a compositing proj-ect, for example
  6. osity, and contrast of your nature photos in a non-destructive way

For this lesson, I'm going to use Photoshop, but you can use any alternative you want. The more familiar you are with your image editor, the easier a time you will have. To get up to speed with Photoshop, check out our eight part learning guide, and our lessons on layers and masks, and adjustment layers You can do this by using a Levels or Curves adjustment layer. Rocket blended in using Lighter Color. Next, I wanted to add a splash to add another layer of depth. I found this photo of a lemon falling into a glass of water. I masked out the bottom part of the photo in a few seconds. Photo by Izzy Gerosa. Then, I changed its blend mode to Screen

The Replace Color adjustment in Photoshop is a simple way to make global changes to a specific color range within an image without having to create a selection marquee first.. In this image of an old storefront, the color of the facade needs to be changed from red to green. Before changing the color, duplicate the layer by going to the Layers Panel, right-clicking (PC) / Ctrl-clicking (Mac) on. Select the layer that you want to adjust the size of in the Layers window. If you don't see it, select Window > Layers, or press F7. Select Free Transform under the Edit menu. Alternatively, use the keyboard shortcut Command + T (Mac) or Ctrl + T (Windows). Select any side of the layer, or the bounding boxes, and drag in the direction you wish. Step 1: Add a Levels Adjustment Layer. Click on the Create new fill or adjustment layer icon. Choose Levels. The Levels window will open and show you the histogram of the photo. The histogram is a visual representation of the exposure of the image. A good histogram should show a lot of pixels in the mid-tones Photoshop Blending Modes for layers can be confusing but understanding the value and when to use them can make all the difference in your post processing. In this article which comes with a video tutorial and example images including one for you to try yourself, Darlene simplifies blend modes to help you understand and learn to apply them in your photography Make sure to use a new layer for every different adjustment you make (e.g. you could have one layer for using the healing tool and another for using the clone stamp). Conclusion Layers are an absolutely crucial part of the editing process in Adobe Photoshop

Using adjustment layers. We'll be using adjustment layers throughout this lesson to correct images. As we discussed in the previous lesson, adjustment layers are a type of nondestructive editing because they don't actually change anything about the original image. And because you can continue to tweak adjustment layers as you work, it's easy to try out different effects and get the image to. The Curves Adjustment Layer Panel in Photoshop CS6 The magic 'S' in Curves adjustment will always come in handy Most contrast adjustments can be made in Camera Raw, but Curves Adjustment Layers are still useful when you need to tweak the contrast of an image with several layers To access Layer Styles, double-click a layer in photoshop. From there, you can tweak various settings to alter the appearance of the layer. Layers that contain Layer Styles have an fx icon on them. If you make a Layer Style that you think you'll reuse, you can save it in the Styles palette

How to Thicken the Lines of Line Art in Photoshop. Download Article. Explore this Article. methods. 1 Tracing Over the Lines. 2 Using the Minimum Filter. 3 Using the Layer Mode. 4 Using a Levels Adjustment Layer What You'll Be Creating In this tutorial, I'll show you how to use Photoshop adjustment layers to create a fantasy photo manipulation featuring a rock goddess. First, we'll build the base scene using several arch, rock and landscape images. After that, we'll add the ground, the model's face, and a rock texture. Later, we'll add the trees, man, and hawks Adjust the Radius until the transitions in your image look right, and click OK. Add a Layer Mask. For the ultimate in control you can add a layer mask to the layer. This lets you adjust your adjustments non-destructively! To add a mask, click the New Layer Mask button in the Layers panel

Photoshop Adjustment Layers Explained and How to Use Them

  1. As a rule, I will always use an adjustment layer to preserve the original pixels in the image just in case I make a mistake. Click Layer > New Adjustment Layer (or Layer > New > Adjustment Layer for older versions of Photoshop). Give the layer a name or accept the default name it gives you and click the OK button. 5
  2. ii) Make a Kaleidoscopic Image. Flipping images can help to create a kaleidoscopic image. The effect is as simple as taking a picture (such as a flower). Take a part of it and then flip it horizontally, then vertically. Step 1: Open your first image, change the locked layer to a regular layer. Transform the shape to 60 degrees
  3. utes. After adding a Levels Adjustment Layer over the image you wish to color, the Levels properties dialog will appear
  4. Use Levels, Curves, or a lighting adjustment tool of your choice to boost the midtones. Doing this may wash out the color of the image a little bit, so if you can you should also boost the red.
  5. How to sharpen an image in Adobe Photoshop: Reduce the noise in your image (click on Filter on the Menu Bar, click Noise, then select Reduce Noise). Create a new layer of the same image (select Layer on the Menu Bar and click Duplicate Layer) or make a selection from the image (click Select on the Menu Bar, click on Edit in Quick Mask Mode, and.
  6. Also, because high pass exists as a separate layer, you can adjust the layer's Opacity and Blending Modes to control the strength of sharpening over the entire image. You can then use masks to control where sharpening is applied within the image and to make localized changes in the strength of sharpening
  7. (left image) With a contrast mask as described above, plus a layer mask with a gradient fill, so the contrast mask is mostly applied to the area below the cliffs. (right image) Note particularly the change in the color of the cliffs and the light part of the sky just above the cliffs, in the image using the full contrast mask (upper right)
Manipulate a Man Portrait into Dark Wizard in Photoshop

Draw a selection around the teeth. If you are using a mouse, your selection may not be perfectly precise. Don't worry, though; you'll have a chance to adjust it later on. 4. Create a Hue/Saturation Adjustment Layer. In the Layers panel, click the New Fill or Adjustment Layer button. This will bring up a drop-down menu of Adjustment Layer. Next, we'll make a new layer based on the line art. (1) Create a new layer by selecting Create a New Layer from the Layer panel. (2) A canvas with the dimensions of the selected area will appear. (3) Select the Edit menu > Fill. (4) Select a color to fill from Contents. (5) Uncheck the Preserve Transparency option and click OK To make the light trail blend in to the image, use a Hue/Saturation adjustment to change it from blue to pink, and set the Blend Mode to Screen. Then mask it to make a gradual trail. Duplicate this new layer and use another part of the image to make another light trail below the one, and change the Blend Mode to Overlay and Opacity to 65%

Adjustment Layers in Adobe Photoshop 2020. today, we're gonna talk about tonal adjustments and adjustment layers. What I mean by a tonal adjustment is one that is not designed to a just color instead is designed to adjust the brightness of your picture, so that means you want to brighten it, darken it, add contrast, reduced contrast, were Fill both layers with 50% grey. 3. Change the blend mode for the dodge layer to overlay, and for the burn layer to soft light. 4. Use a white brush on the dodge layer to lighten the image. 5. Use a black brush on the burn layer to darken the image. This is how it looks like in Photoshop when you have created them Image layers are layers that take the form of images. In other words, an image layer is a second image stacked on top of the original. This can be useful for compositing images, when you take a part of one photo and incorporate it into another for artistic effect. To create an image layer, hit the Plus icon, then select New Image Layer Select the Darken/Lighten Center layer; Create a Layer Mask; Create all Luminosity Masks; Find the Darks mask where all the dark parts you want to remove are white; Click on the Layer Mask (white box next to the adjustment layer) Select the luminosity mask you want to use (cmd/ctrl + click) Select a soft, black brus

Use Photoshop Layer Mask to adjust exposure in one area of

  1. Photoshop Dark Photo Effect Photoshop Tutorial PSDDud
  2. Darken Overexposed Photos With The - Photoshop Essential
  3. How to Lighten or Darken Selective Colors in Photoshop
  4. Getting Started Using Curves Adjustment Layers in Photosho
  5. How to Fix & Brighten an Underexposed Dark Photo in Photosho
  6. Photoshop Gradient Tool: Part 2 - Adjusting Images
  7. How to use Adjustment Layers in Photoshop CS

6 essential Photoshop layers to improve your images

  1. 6 Cool Ways To Use The Levels Adjustment Layer In Photoshop
  2. How to edit part of an image with a layer mask - Adobe
  3. What Are Adjustment Layers in Photoshop? - How-To Gee
  4. Adobe Photoshop: Using a Mask on an Adjustment Layer
  5. What Are Photoshop Overlays and How to Use The
  6. How to Create a Dark Gothic Portrait Photo Manipulation
Create a Landscape Photo Manipulation in Photoshop - PSD StackCreate a Dark Landscape Matte Painting with Photoshop | PSDFanHow to Create a Mermaid in Adobe PhotoshopCreate a Funny Surreal Underground Scene With Adobe Photoshop